Master the Code: Engaging 10-Question IFGC Mastery Challenge

1. Where a reduction in clearance to combustible materials is permitted, the side clearance for an appliance is permitted to be reduced from 12 inches to a minimum of              inches by installing No. 24 gage galvanized sheet metal with a ventilated air space

2. Where approved roof-mounted fall-restraint devices are installed in place of a required guard, the devices must be installed every                 feet or less along the ridge line.

3. The code official has the authority to allow temporary connection of an installation to the sources of energy for the purpose of ________________.

4. When using the known air-infiltration-rate method for indoor combustion air, the maximum infiltration rate that can be used in the equations is                        ACH.

5. Only in an emergency situation that poses an immediate hazard to life or property is the code official authorized to _______________.

6. Where the code official finds that a proposed alternative material does not comply with the intent of the code provisions, the code official shall ________.

7. The permit or a copy shall be kept on the site of the work __________.

8. Where an appliance is located in an attic, a                     is required at the access opening to the attic passageway.

9. _________ provide supporting documentation to verify that an alternative material or assembly complies with the intent of the code.

10. Appliances in structures located in flood hazard areas shall be located at or above the                   .